|
|
|
Design and Computation | Materials Characterization | Mixing
and Compounding | Plastics Recycling | Reactive Processing | Thermoplastic Foam
Processing | Blown Film | Devolatilization
| Injection Molding Narh, K.A., Xanthos, M., Li, Z., Dey, S.K.,
Yilmazer, U., Li, Y., “Simulation of the “Intrusion” Process for
Thick-Walled Thermoplastics- Product and Process “, ANTEC 98 U. Yilmazer, M. Xanthos, S.K. Dey, S. Mitra
and C. Feng, “Mechanical and Thermal Properties of Leachate Analysis of
Carpet Residue/Polyethylene Prototypes for Building and Construction
Applications”, ANTEC 99, SPE Proceedings page 3265. "Simulation of the Intrusion Process
for Thick-Walled Thermoplastics - Product and Process Characteristics",
K.A. Narh, M. Xanthos, Z. Li, S.K. Dey, U. Yilmazer, Y. Li, SPE ANTEC, 1767,
(1998). "Prototype Design and Process
Optimization Procedure for Products from Glass Fiber Reinforced Polymer
Blends", K.A. Narh and M. Xanthos, Proc. ASME Intern Mech. "Extrusion Process Analysis with PASS
in Applications of CAE in Extrusion and other Continuous Processes",
Sebastian, D.H. and R. Rakos, E.C. Bernhardt and K.E. O’Brien, Eds.,
Hanser, "New Insights into the Modeling of
Co-rotating Intermeshing Twin Screw Extruders", Sebastian, D.H. and R.
Rakos, ANTEC ‘90 Proceedings, p. 135, Dallas, Texas, 1990. "Prediction and Verification of the
Performance of Conveying Elements within the Co-rotating Fully Intermeshing
Twin Screw Extruder", McCullough, T.W., D.H. Sebastian, and R. Rakos,
ANTEC ‘90 Proceedings, p. 147, Dallas, Texas, 1990. "Slip Velocity and Slip Layer
Thickness in Flow of Concentrated Suspensions", F. Soltani and U.
Yilmazer, J. Applied Polymer Science, Vol. 69, 515, (1998). "Viscoelastic Properties of
Suspensions with Weakly Interacting Particles", G. Bayram, U. Yilmazer,
N. Orbey, J. Applied Polymer Science, Vol. 69, 507, (1998). "Effect of Fillers on Thermal and
Mechanical Properties of Polyurethanc Elastomer", S. Benli, U. Yilmazer,
F. Pekel, S. Ozkar, J. Applied Polymer Science, Vol. 68, 1057, (1998). "Mechanical and Burning Properties of
Highly Loaded Composite Propellants", A. Goemez, C. Erisken, U.
Yilmazer, F. Pekel, S. Ozkar, J. Applied Polymer Science, Vol. 67, 1547,
(1998). "Helical Barrel Rheometer", D.B. "Processing/Structure Relationships of
Mica-Filled Polyethylene Films with Low Oxygen Permeability" M. Xanthos,
N. Faridi and Y. Li, Intern. Polym. Proc., 13, 1, 58, (March 1998). " In-line Measurement of Gas
Solubility in Polystyrene and Polyethylene Terephthalate Melts During Foam
Extrusion", Q. Zhang, M. Xanthos and S.K. Dey, The 1998 International
Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim,
CA "Effects of Matrix Composition on
Properties of Glass Fiber Reinforced Polymer Blends" M. Xanthos, Proc.
55th SPE ANTEC, 43, 3109 (1997). "Measurement of Melt Viscoelastic
Properties of Polyethylene and Their Blends - A Comparison of Experimental
Techniques" M. Xanthos, V. Tan and A. Ponnusamy, Polym. "Effects of Carbonate Salts on
Crystallization Kinetics and Properties of Recycled Polyethylene
Terephthalate" M. Xanthos, B.C. Baltzis and P.P. Hsu, J. Appl. Polym.
Sci., 64, 1423 (1997) "Measurement of Gas Solubility in
Thermoplastic Melts During Foam Extrusion" S.K. Dey, Q. Zhang, N. Faridi
and M. Xanthos, Proc. 55th SPE ANTEC, 43, 1988 (1997). "On-line and Off-line Gas Solubility
Measurements in Foamable Thermoplastics", N. Faridi, S.K. Dey, M.
Xanthos and Q. Zhang, Thirteenth International Polymer Processing Society
Meeting, Meadowlands Hilton Hotel, Secaucus, NJ, June 10-13, 1997. "Effects of Fillers on Permeability
and Mechanical Properties of HDPE Blown Films" T.S. Gill and M. Xanthos,
J. Vinyl and Addit. Technol., 2, 3, 248 (1996); ibid., Proc. 54th SPE ANTEC,
42, 1757 (1996). "Some Microwave and Mechanical
Properties of Carbon Fiber-Polypropylene and Carbon Black-Polypropylene
Composites", A. Kaynak, A. Polat, U. Yilmazer, Materials Research
Bulletin, 31, (1996). "Modeling and Rheology of HTPB Solid
Properties", C. Erisken, A. Goemez, U. Yilmazer, S. Ozkar, F. Pekel,
"Energetic Materials - Technology, Manufacturing and Processing", 27th
International Annual Conference of ICT, Karlsruhe, Germany, 49-1, (1996). "Rheological Behavior of a Model
Suspension: Hydroxyl Terminated Polybutadiene Filled with Glass Beads",
G. Bayram, U. Yilmazer, N. Orbey, The 1996 I. Chem. Research Event/Second
European Conference for Young Researchers, Leeds, England, 958 (1996). "The Effect of Solids Loading on the
Mechanical and Ballistic Properties of Solid Rocket Fuels", A. Goemez,
C. Erisken, F. Pekel, U. Yilmazer, S. Ozkar, The Second Turkish Chemical Engineering
Congress, 1397, (1996). "The Helical Barrel Rheometer for
On-line Viscometry", D.B. "Polyolefin Blends with Low Oxygen Permeability"
M. Xanthos, J. Grenci and S.S. Dagli, Proc. 53rd SPE ANTEC, 41, 3194 (1995). "Emissions During Thermoplastics
Processing-A Review" S.H. Patel and M. Xanthos, Adv. Polym. Technol,.
14, 1, 67 (1995). "Recent Developments in In-line
Spectroscopy/Microscopy for Monitoring Extrusion Processes" M. Xanthos
and S.H. Patel, Adv. Polym. Technol, 14, 2, 151 (1995). "Mechanisms and Performance of
Hydrotalcite Acid Neutralizers in Thermoplastics" S.H. Patel, M.
Xanthos, J. Grenci and P.B. Klepak, J. Vinyl and Addit.Technol., 1, 3,
201(1995); ibid., Proc. 53rd SPE ANTEC, 41, 3644 (1995). "Comparative Analysis of Commercially
Available Temperature and Pressure Sensors for Polymer Processing", T.
Gill, S.K. Dey and M. Xanthos, Fifth Annual Mini-Tech Conference, NJIT,
Newark, NJ, April 21, 1995. "Recent Developments in On-line
Analytical Techniques Applicable to the Polymer Industry", S.H. Patel,
D.B. "How Rheology Impacts
Manufacturing", C.G. Gogos, S. Bhakuni, R. Potluri and M. Zafar, Food
Ingredients "Flow Instabilities in Capillary Flow
of Concentrated Suspensions", P. Yaras, D.M. Kalyon, U. Yilmazer, Rheol.
Actu., 88, (1994). "Desorption of Residual Monomer from
PVC Resins in a Fluidized Drier", H. Bouaffar, U. Yilmazer, B. Elbirli,
J. Applied Polymer Science, 119, (1994). "Rheological Properties of Filled
Polymers", G. Bayram, N. Orbey, U. Yilmazer, The First Turkish Chemical
Engineering Congress, Vol. 1, 576, (1994). "Applications of On-Line Rheology in
Reactive Alloying", M. Xanthos, J. Grenci, C. Jacob, S.S. Dagli and H.K.
Kotlar, Proc. SPE RETEC on "Blends, Alloys and Modified Polymers",
Akron, OH, October 5-6, 1993. "Flow Response and Microstructure of
Polymers Reinforced with Discontinuous Fibers", T. Davidson, T.A. Huang,
J.P. Brizzolara and D.H. Sebastian, Mat. Res. Soc. Symp. Proc., 289, 231-235,
1993. "The Role of Interface at the Wall in
Flow of Concentrated Composites", U. Yilmazer and D. M.Kalyon, The
Interfacial Interactions in Polymeric Composites, G. Akovali E., Kluwer
Pulblishers, 109, (1993). "Extrusion and Lubrication Flows of
Viscoplastic Fluids with Wall Slip", A. Lawal, D. M. Kalyon, U.
Yilmazer, Chem. "Rheological Behavior of a
Concentrated Suspension. A Solid Rocket Fuel Simulant", D.M. Kalyon, P.
Yaras, B. Aral, U. Yilmazer, J. Rheol., 32, (1993). "Development of Potentially Degradable
Materials for Marine Applications - III. Polyethylene-Polyethylene Oxide
Blends", K.E. Gonsalves, S.H. Patel and D.H. Trivedi, J. Appl. Polym.
Sci., 45, 217-225 (1992). "Mechanical Properties and Weatherin
Behavior of Linear Low Density Polyethylene/Low Density Polyethylene Blends
for Agricultural Applications", U. Yilmazer, Advances in Polymer Blends
and Alloy Technology, Vol. III, Technomic, 132, (1992). "Tensile, Flexural and Impact
Properties of Thermoplastic Matirx Reinforced by Glass Fiber and Glass Bead
Hybrids", U. Yilmazer, Composite Science and Technology, 119, (1992). "Measuring Thermal Conductivity and
Thermal Diffusivity of Polymeric Solids and Melts", V. Tan, Advances in
Polymer Technology, Vol. 11, 1, p. 69-71, 1991/1992. "Measuring Polymer Melt Viscosities at
High Pressures: The Hydrostatic Pressure Rheometer", R. Staats-Westover,
Advances in Polymer Technology, Vol. 11, 2, p. 147-151, 1991/1992. "Development of Potentially Degradable
Materials for Marine Applications - II. Polypropylene-Starch Blends",
K.E. Gonsalves, S.H. Patel and X. Chen., J. Appl. Polym. Sci., 43, 405-415
(1991). "Melting Behavior of Controlled
Rheology Polypropylene" S.H. Ryu, C.G. Gogos and M. Xanthos, Polymer,
32, 13, 2449 (1991). "Dilatancy of Concentrated Suspensions
with Newtonian Matrices", U. Yilmazer, D.M. Kalyon, Polymer Composites,
26, (1991). "Development of a PVC Water Proofing
Sheet", U. Yilmazer, Polymer-Plastic Technology and Engineering, 239,
(1991). "Rheocalorimeter - Measures Reaction
Viscosity vs. Conversion from Monomer to Polymer", J.A. Biesenberger and
D. Rosendale, Advances in Polymer Technology, Vol. 10, 2, p. 153-155, 1990. "Rheological Behavior of Highly Filled
Suspensions Which Exhibit Slip at the Wall", D. M. Kalyon, U. Yilmazer,
Polymer Rheology and Processing, A. A. Collyer and "Measuring Melt Elasticity - The Melt
Elasticity Indexer", M. Xanthos, D.W. Yu, Advances in Polymer
Technology, Vol. 10, 3, p. 243-244, 1990. "Measurement of Solubility of Gases in
Polymer Melts", S.K. Dey, Advances in Polymer Technology, Vol. 10, 4, p.
327-328, 1990. "Development of Potentially Degradable
Materials for Marine Applications - "Rheological Behavior of Highly Filled
Suspensions", D.M. Kalyon, B. Aral, U. Yilmazer, SPE ANTEC, 1560,
(1990). "Slip Effects in Capillary and
Parallel Disk Torsional Flow of Highly Filled Suspensions", U. Yilmazer,
D.M. Kalyon, J. Rheology, 1197, (1989). "Mat Formation and Unstable Flows of
Hihgly Filled Suspensions in Capillaries ansd Continuous Processors", U.
Yilmazer, C.G. Gogos, D.M. Kalyon, Polymer Composites, 242, (1989). "Viscosity and Die Swell of
Acrylonitrite-Butadiene-Styrene Filled with Glass Beasds and Glass
Fibers", Polymer Composites, 1, (1989). "Unstable Flows During Compounding of
Highly Filled Suspensions", U. Yilmazer, C.G. Gogos, D.M. Kalyon, SPE
ANTEC, 191, (1989). "Slip Effects in Viscometric Flows of
Highly Filled Suspensions", U. Yilmazer, D.M. Kalyon, SPE ANTEC, 1682,
(1989). "Viscosity and Die Swell of
Acrylonitrite-Butadiene-Styrene Filled with Glass Beads and Glass
Fibers", U. Yilmazer, SPE ANTEC, 1608, (1988). "Mechanical Properties of Glass
Fiber/Glass Bead/Acrylonitrile Butadiene Styrene Ternary Composites", U.
Yilmazer, S.F. Chabira, SPE ANTEC, 518, (1987). "Plastics Compounding Equipment and
Processing", D.B. "A Comparative Study on the
Performance of Three Single-Screw Mixing Elements in Melt-melt Mixing of
Immiscible Blends", M. Esseghir, B. David, C.G. Gogos, D.B. "Improving Incorporation of Fillers in
Plastics", D.B. "Effect of Volatiles on Gear Pump
Performance", D.B. "Effects of Matrix Composition on
Properties of Glass Fiber Reinforced Polymer Blends" M. Xanthos, Proc.
55th SPE ANTEC, 43, 3109 (1997). "Evolution of Melting in Co-TSE
Kneading Blocks", M. Esseghir, C.G. Gogos, D.W. Yu and D.B. "Practical Aspects of Processing in
Intermeshing Twin Screw Extruders", D.B. "Monitoring Process Viscosities with a
New On-line Rheometer", D.B. "Paste and Viscous Material
Processing", D.B. "Melting Mechanisms of Single
Component Polymers in Co-Rotating TSE Kneading Blocks", M. Esseghir,
D.W. Yu, C.G. Gogos, D.B. "Morphology and Rheology Sensors for
In-Line and On-Line Microstructure Monitoring in Compounding", M.
Esseghir, D.W. Yu, C.G. Gogos, and D.B. "Solid and Melt Rheology Driven
Dispersive Mixing Mechanisms and Rates in Immiscible Polymer Blends",
C.G. Gogos, M. Esseghir, D.W. Yu and D.B. "Plastics Processing" M. Xanthos
and D.B. "Impact Modification of
Aromatic/Aliphatic Polyamide Blends - Effects of Composition and Processing
Conditions" M. Xanthos, J.F. Parmer, M.L. La "Measure Viscosity On-Line with the
Helical Barrel Rheometer", D.B. "Scale-up Effects Upon Morphology
Development During Mix-Melting of Multiphase Polymer Blends in ZSK
Extruders", D.W. Yu, J.E. Curry and M. Esseghir, SPE ANTEC Tech. Papers,
Vol. 55, April-May, 1996. "Improving Compounding with
Filters", D.B. "Transmission Electron Microscopy
Measurements of Compatibilizer Distribution in Polustyrene/Polyethylene
Homopolymer Blends", G. Kim, M. Libera, R. Potluri and C.G. Gogos, 7th
DSEA Northeast Regional Conference, Rutgers University, Piscataway, NJ, March
22-23, 1996. "Influence of Mixing Protocol on the
Morphology and Mechanical Properties of an Impact-Modified, Immiscible
Polyester/Polycarbonate Blend", M. Tant, J. Staples, D. Calvert, C.G.
Gogos, M. Esseghir, R. Potluri, D.B. "The Distribution of SIS
Compatibilizer in Melt-Mixed Polystyrene-Polyethlene Homopolymer
Blends", G. Kim, M. Libera, R. Potluri and C.G. Gogos, accepted to
Morphological Control in Multiphase Polymer Mixtures, ed. R. Briber et. al,
MRS Symp. Proc. 461, "The Use of On-Line Optical Microscopy
for Monitoring Compounding and other Polymer Processing Operations";
D.W. Yu, M. Esseghir, and C.G. Gogos, SPE ANTEC Tech Papers, Vol. 53, p.
136-144, May 1995. "Rheology-Driven Mixing Mechanisms in
TSMEE Kneading Blocks", M. Esseghir, D.W. Yu and C.G. Gogos, SPE ANTEC
Tech. Papers, Vol. 53, p. 1994-2000, 1995. "Recent Developments in In-line
Spectroscopy/Microscopy for Monitoring Extrusion Processes" M. Xanthos
and S.H. Patel, Adv. Polym. Technol, 14, 2, 151 (1995). "Applications of On-line Rheometry in
Reactive Compounding", M. Xanthos, Adv. Polym. Technol., 14, 3, 207
(1995). "Polyolefin Blends with Low Oxygen
Permeability" M. Xanthos, J. Grenci and S.S. Dagli, Proc. 53rd SPE
ANTEC, 41, 3194 (1995). "Evaluation of Dissipative Mixing in
Blends of Polycarbonate and Styrene-Acrylonitrile Copolymer", S. Lee, H.
Kim, S.S. Woo, D.W. Yu, S.H. Kim, M. Esseghir and C.G. Gogos, 11th Int.
Meeting of the Polymer Processing Society, Seoul, Korea, March, 1995. "The Effect of Immiscible Blends
Component Rheology on the Mechanism and Rates of Laminar Dispersive
Mixing", C.G. Gogos, M. Avgousti, M. Esseghir and D.W. Yu, COMPOUNDING
'95, "Compounding Techniques for Improved
Filter Reinforcement", D.B. "Effect of Triblock Compatibilizers on
the Morphology of LDPE/PS Blends", R. Potluri, C.G. Gogos, S. Dagli and
M. Libera, ANTEC '95, Boston, MA, May, 1995. "The Physical and Chemical Nature of
Plastics Additives" M. Xanthos, Chapter 14 of Mixing and Compounding of
Polymers - Theory and Practice", pp. 471-492, I. Manas-Zloczower and Z.
Tadmor, Eds., Carl Hanser Verlag, Munich, New York (1994). "Peroxide Modification of a
Multicomponent Polymer Blend with Potential Applications in Recycling"
T. Vivier and M. Xanthos, J. Appl. Polym. Sci., 54, 569 (1994). "Kinetic Studies and Process Analysis
of the Reactive Compatibilization of Nylon 6/Polypropylene Blends" S.S.
Dagli, M. Xanthos and J.A. Biesenberger, Polym. "LDPE/PP Blends Modified by Peroxide
and Radiation Induced Reactions" D.W. Yu, M. Xanthos and C.G. Gogos,
", J. Appl. Polym. Sci., 52, 99 (1994). "The Twin-Screw Mixing Element
Evaluator: On-Line Performance Evaluation of Modular Twin-Screw Mixing
Elements", C.G. Gogos, M. Esseghir, D.W. Yu, D.B. "Dispersive Mixing in Immiscible
Polymer Blends", C. Gogos, M. Esseghir, D.B. "Use of the Mixing Element Evaluator
to Study Mixing Mechanisms and Dispersions Rates", M. Esseghir, C.G.
Gogos, D.W. Yu, D.B. "Determining Pressure Drop in
Extrusion", D.B. "A Device to Study Compaction and
Conveying in Single Screw Extrusion", C.G. Gogos, M. Zafar, D. Sebastian,
D.B. "Back Mixed Drag Flow Apparatus",
J.A. Biesenberger, D.B. "Cooling in Single Screw
Extruders", S.K. Dey, C. Jacob, D.B. "Providing Backmixing in an
Extruder", Y. Lu, J.A. Biesenberger, D.B. "Melting of Plastics in Kneading
Blocks", D.B. "Effects of Compounding Parameters in
the Reactive Compatibilization of HDPE/PET Blends", S.S. Dagli and
K.M.Kamdar, Eighth International congress on Compatibilizers and Reactive
Polymer Alloying, Compalloy '93, Newark, NJ, 1993. "Reactive Compatibilization of HDPE/PET
Blends - Part I: Effects of Sequence of Component Addition", K.M. Kamdar
and S.S. Dagli, Proc. 51st SPE ANTEC Ann. Conf., 39, 1249, New Orleans, LA,
May, 1993. "The Mixing Element Evaluator",
C.G. Gogos, M. Esseghir, D.B. "Comparison of Mixing Elements in
Single Screw Reactive Extrusion: Compatibilization of Nylon 6 and
Polypropylene Blends" S.S. Dagli, K.M. Kamdar and M. Xanthos,
Engineering Plastics, 8, 197 (1995); ibid. Proc. 51st SPE ANTEC, 39, 18
(1993). "Dispersive Mixing Studies with the
Twin Screw Mixing Element Evaluator: Mixing Performance and Evolution of
Dispersed Phase Morphology in Twin Screw Kneading Blocks", M. Esseghir
and D.W. Yu, 3M Compounding Mixing and Extrusion Conference, St. Paul,
Minnesota, October 11-14, 1993. "Dispersive Mixing Studies with the
Single Screw Mixing Element Evaluator: "Organic Fibers as Modifiers for
Thermoplastic Polyurethances", R. Tupil, S.K. Dey and M. Xanthos, PPS
meeting, "Monitoring Continuous Compounding
Through On-line Instrumentation", S.K. Dey, C. Jacob and M. Xanthos, SPE
Retec, "Blends of Nylon 6 and Polypropylene
with Potential Applications in Recycling: Effects of Extrusion Variables on
Blend Characteristics" S.S. Dagli, M. Xanthos and J.A. Biesenberger,
Chapter 19 of "Emerging Technologies in Plastics Recycling", G.
Andrews and P. Subramanian, Eds., ACS Symposium Series No. 513, Washington, DC
(1992). "Development of Potentially Degradable
Materials for Marine Applications - III. Polyethylene-Polyethylene Oxide
Blends", K.E. Gonsalves, S.H. Patel and D.H. Trivedi, J. Appl. Polym.
Sci., 45, 217-225 (1992). "Compatibilization of Refined
Commingled Post-Consumer Plastics" M. Xanthos, A. Patel, S.K. Dey, S.S.
Dagli, C. Jacob, T.J. Nosker and R.W. Renfree, Adv. Polym. Technol., 13, 3,
231 (1994); ibid., Proc. 50th SPE ANTEC, 38, 596 (1992). "An Overview of Additives and
Modifiers for Polymer Blends: Facts, Deductions, and Uncertainties" L.
Mascia and M. Xanthos, Adv. Polym. Technol., 11, 4, 237 (1992). "Peroxide Modified Polyolefin Blends -
Part II - Effects on LDPE/PP Blends with Polymer Components of Dissimilar
Initial Viscosities" D.W. Yu, M. Xanthos and C.G. Gogos, , Adv. Polym.
Technol., 11, 4, 295 (1992). "Development of Potentially Degradable
Materials for Marine Applications - II. Polypropylene-Starch Blends",
K.E. Gonsalves, S.H. Patel and X. Chen., J. Appl. Polym. Sci., 43, 405-415
(1991). "Compatibilization of Polymer Blends
by Reactive Processing" M. Xanthos and S.S. Dagli, Polym. "Drag and Pressure Flow in Twin Screw
Extruders", D.B. "Compounding in Twin Screw
Extruders", D.B. "Peroxide Modified Polyolefin Blends -
Part I - Effects on LDPE/PP Blends with Components of Similar Initial
Viscosities" D.W. Yu, M. Xanthos and C.G. Gogos, Adv. Polym. Technol.,
10, 3, 163 (1990). "Polypropylene/Polyethylene
Terephthalate Blends Compatibilized through Functionalization" M.
Xanthos, M.W. Young, and J.A. Biesenberger, Polym. "Development of Potentially Degradable
Materials for Marine Applications - "Interfacial Agents for Multiphase
Polymer Systems: Recent Advances" M. Xanthos, Polym. Eng. Sci., 28, 1392
(1988); ibid., Proc. NRCC/IMRI "Polyblends - 88" Symposium,
Boucherville, Que., Canada, April 5-6, 1988. "Development of Experimental
Techniques and Simulation Methods to Analyze Mixing in Co-rotating Twin Screw
Extrusion", D.M. Kalyon, Advances in Polymer Technology, 337, (1988). "Evaluating Screw Performance:
Extrusion Process Stability and Degree of Mixing from Melt Rheology Data and
Measurement on an Instrumented Extruder", A.P. Plochocki, S.K. Dey and
K. Wilezytiski, Polym. "Mixing Performance Criterion for Twin
Screw Extruder", S.K. Dey, A. Kiani, A.P. Plochocki and J.E. Curry,
Kunststoffe, 1986. "Compounding Industrial Polymers"
Effect of Mixer Type on Melt Rheology and Cocomittant Morphology of a Model
Polyblend/Alloy - Recent in Experiments and Theory", A.P. Plochocki,
S.K. Dey and P.S. Hope, Retec, 1986. U. Yilmazer, M. Xanthos, S.K. Dey, S. Mitra
and C. Feng, “Mechanical and Thermal Properties of Leachate Analysis of
Carpet Residue/Polyethylene Prototypes for Building and Construction
Applications”, ANTEC’99, SPE Preprint page 3265. "Simulation of the Intrusion Process
for Thick-Walled Thermoplastics Product and Process", K.A. Narh, M.
Xanthos, Z. Li, S.K. Dey, U. Yilmazer, ANTEC '98. "Effects of Carbonate Salts on
Crystallization Kinetics and Properties of Recycled Polyethylene
Terephthalate", M. Xanthos, B.C. Baltxis and P.P. Hsu, J. Appl. Polym.
Sci., 64, 1423 (1997). "Preparation and Characterization of
Composites from the Glycolysis Products of Nylon Waste", M. Akbudak, U.
Yilmazer, The Second Turkish Chemical Engineering Congress, 788, (1996). "Thermoplastic Composites from Maleic
Anhydride Modified Post-Consumer Plastics", M. Xanthos, J. Grenci, S.H.
Patel, A. Patel, C. Jacob, S.K. Dey and S.S. Dagli, Polym. Compos., 16, 3,
204 (1995). "PVC Modification/Compatibilization
Reactions-Potential Applications in Recycling", M. Xanthos and S.H.
Patel, Proc. SPE RETEC on "What's new in PVC?", p. 43, "Energy Savings from Plastics Recovery
Technologies", M. Xanthos and A.L. Bisio, The Intersociety Polymer
Conference, "Recycling of Plastic Fishing Nets in
the "Energy Savings from Plastics Recovery
Technologies", M. Xanthos and A.L. Bisio, The Intersociety Polymer
Conference, "A Research Needs Assessment for Waste
Plastics Recycling", Report DOE/ER-30168 prepared by PPI staff for the "How to Manage Plastics Waste:
Technology and Market Opportunities", A.L. Bisio and M. Xanthos, Eds,
Hanser Publishers, "Value Added Blends and Composites
from Recycled Plastic Fishing Gear", S.S. Dagli, S.K. Dey, R.Tupil and
M. Xanthos, J. Vinyl and Additive Technol., 1, 13,195 (1995); ibid., Proc.
52nd SPE ANTEC, 40, 3017 (1994). "Peroxide Modification of a
Multicomponent Polymer Blend with Potential Applications in Recycling",
T. Vivier and M. Xanthos, J. Appl. Polym. Sci., 54, 569 (1994). "Ternary Recycling of Nylon 6",
A. Emirler, U. Yilmazer, The First Turkish Chemical Engineering Congress,
Vol. 1, 311, (1994). "Peroxide Modification of a
Multicomponent Polymer Blend for Recycling", T. Vivier, M. Xanthos and
P. Breant, Proc. 51st SPE ANTEC Ann. Conf., 39, 1227, New Orleans, LA, May,
1993. "Thermoplastic Composites from
Post-Consumer Mixed Plastics Modified for Improved Adhesion", J. Grenci,
S.K. Dey, C. Jacob, A. Patel, S.S. Dagli, S. H. Patel and M. Xanthos, Proc.
51st SPE ANTEC Ann. Conf., 39, 488, New Orleans, LA, May, 1993. "Properties and Microstructure of
Impact Modified Post-Consumer Plastics", K.E. Van Ness, W.T. Fielder,
L.W. Strickler, M. Xanthos, T.J. Nosker and R.W. Renfree, Proc. 51st SPE
ANTEC, 39, 2851 (1993). "Alternative Procedures for the
Recycling of Sheet Molding Compounds (SMC)", S. H. Patel, K. E.
Gonsalves, S. S. Stivala, L. S. Reich, and D. H. Trivedi, Adv. Polym.
Technol., 12, 1, 35 (1993). "Compatibilization of Refined
Commingled Post Consumer Plastics", M. Xanthos, A. Patel, S.K. Dey, S.S.
Dagli, C. Jacob, TlJ. Nosker and R.W. Renfree, Proc. 51st SPE ANTEC 39, 2851,
1993. "Development of Potentially Degradable
Materials for Marine Applications - III. Polyethylene-Polyethylene Oxide
Blends", K.E. Gonsalves, S.H. Patel and D.H. Trivedi, J. Appl. Polym.
Sci., 45, 217-225 (1992). "Overview of Interfacial Agents for
Recycling Commingled Plastics", M. Xanthos, AIChE Spring National
Meeting, Paper No 24a, New Orleans, LA, March 29 - April 2, 1992. "Blends of Nylon 6 and Polypropylene
with Potential Applications in Recycling: Effects of Extrusion Variables on
Blend Characteristics", S.S. Dagli, M. Xanthos and J.A. Biesenberger,
Chapter 19 of "Emerging Technologies in Plastics Recycling", G.
Andrews and P. Subramanian, Eds., ACS Symposium Series No. 513, Washington,
DC (1992). "Recycling of Sheet Molding Compounds
(SMC)", S. H. Patel, K. E. Gonsalves, S. S. Stivala, L. S. Reich, and D.
H. Trivedi, ACS PMSE Proceedings, 67, 455 (1992). "Compatibilization of Refined
Commingled Post-Consumer Plastics", M. Xanthos, A. Patel, S.K. Dey, S.S.
Dagli, C. Jacob, T.J. Nosker and R.W. Renfree, , Adv. Polym. Technol., 13, 3,
231 (1994); ibid., Proc. 50th SPE ANTEC, 38, 596 (1992). "Compatibilization for Reuse of
Commingled Post-Consumer Plastics", M. Xanthos, T.J. Nosker and K.E. Van
Ness, 6th Intern. Congress on Compatibilizers and Reactive Polymer Alloying,
Compalloy '92, "Development of Potentially Degradable
Materials for Marine Applications - II. Polypropylene-Starch Blends",
K.E. Gonsalves, S.H. Patel and X. Chen., J. Appl. Polym. Sci., 43, 405-415
(1991). "Development of Potentially Degradable
Materials for Marine Applications - "Identification and Characterization
of Discarded Plastic Fishing Gear for Recycling", M. Xanthos, A. Patel
and S.S. Dagli, Proc. 48th SPE ANTEC, 36, 1993 (1990). "Recycling of Marine Plastics Debris
Through Melt Reprocessing: A Case for Lost or Abandoned Fishing Gear",
M. Xanthos, P.G. Kelleher, A. Patel and W.G. Gordon, Proc. Second Intern.
Conf. on Marine Debris, Honolulu, HI, April 2-7, 1989; ibid., U.S. Dep.
Commer., NOAA Tech. Memo. NMFS, NOAA-TM-NMFS-SWFSC-154, 870 (1990). "Development of Recycling Technology
for Plastic Fishing Gear - A Materials Evaluation", S.S. Dagli, P.G.
Kelleher, M. Monroy, A. Patel and M. Xanthos, Adv. Polym. Technol., 10, 2,
125 (1990). "Reactive Extrusion of Styrene-Maleic
Anhydride Copolymer and Polyol Blends", G. Bayram, U. Yilmazer, M.
Xanthos, SPE ANTEC, 1687, (1998). "Impact Modification of
Aromatic/Aliphatic Polyamide Blends - Effects of Composition and Processing
Conditions", M. Xanthos, J.F. Parmer, M.L. La Forest and G.R. Smith, J.
Appl. Polym. Sci., 62, 1167 (1996) "Plastics Processing" M.Xanthos and
D.B. "Emissions During Thermoplastics
Processing - A Review", S.H. Patel and M. Xanthos, Adv. Poly. Technol.,
14, 1, 67 ,1995. "Recent Developments in In-line
Spectroscopy/Microscopy for Monitoring Extrusion Processes", M. Xanthos
and S.H. Patel, Adv. Polym. Technol., 14, 2, 151, 1995. "Thermoplastic Composites from Maleic
Anhydride Modified Post-Consumer Plastics", M. Xanthos, J. Grenci, S.H.
Patel, A. Patel, C. Jacob, S.K. Dey and S.S. Dagli, Polym. Compos. , 16, 3,
204 (1995). "Applications of On-line Rheometry in
Reactive Compounding" M. Xanthos, Adv. Polym. Technol., 14, 3, 207
(1995). "PVC Modification/Compatibilization Reactions-Potential
Applications in Recycling"' M. Xanthos and S.H. Patel, Proc. SPE RETEC
on "What's new in PVC?", p. 43, "Bulk Polymerization in Continuous
Drag Flow Back Mix Reactor", Y. Lu, J.A. Biesenberger, D.B. "Peroxide Modification of a
Multicomponent Polymer Blend with Potential Applications in Recycling"
T. Vivier and M. Xanthos, J. Appl. Polym. Sci., 54, 569 (1994). "Kinetic Studies and Process Analysis
of the Reactive Compatibilization of Nylon 6/Polypropylene Blends" S.S.
Dagli, M. Xanthos and J.A. Biesenberger, Polym. "LDPE/PP Blends Modified by Peroxide
and Radiation Induced Reactions",D.W. Yu, M. Xanthos and C.G. Gogos, J.
Appl. Polym. Sci., 52, 99 (1994). "On-Line Monitoring of Reactive
Compatibilization", M. Xanthos, J. Grenci, C. Jacob and S.S. Dagli,
Proc. 52nd SPE ANTEC, 40, 1496 (1994). "Mixing Technology Key to Reactive
Extrusion", D. B. "Continuous Polymerization in a Back
Mixed Drag Flow Reactor", Y. Lu, J.A. Biesenberger, D.B. "Comparison of Mixing Elements in
Single Screw Reactive Extrusion: Compatibilization of Nylon 6 and
Polypropylene Blends", S.S. Dagli, K.M. Kamdar and M. Xanthos,
Engineering Plastics, 8, 197 (1995); ibid. Proc. 51st SPE ANTEC, 39, 18
(1993). "Peroxide Modification of a
Multicomponent Polymer Blend for Recycling", T. Vivier, M. Xanthos and
P. Breant, Proc. 51st SPE ANTEC Ann. Conf., 39, 1227, New Orleans, LA, May,
1993. "Thermoplastic Composites from
Post-Consumer Mixed Plastics Modified for Improved Adhesion", J. Grenci,
S.K. Dey, C. Jacob, A. Patel, S.S. Dagli, S.H. Patel and M. Xanthos, Proc.
51st SPE ANTEC Ann. Conf., 39, 488, New Orleans, LA, May, 1993. "A Backmix Drag-Flow Reactor",
J.A. Biesenberger, Y. Lu and D.B. "Reactive compatibilization of
HDPE/PET Blends - Part I: Effects of Sequence of Component Addition",
K.M. Kamdar and S.S. Dagli, Proc. 51st SPE ANTEC Ann. Conf., 39, 1249, New
Orleans, LA, May, 1993. "Effects of Compounding Paramenters on
the Reactive Compatibilization of HDPE/PET Blends", S.S. Dagli and K.M.
Kamdar, Eighth International congress on Compatibilizers and Reactive Polymer
Alloying, Compalloy '93, Newark, NJ, 1993. "Applications of On-Line Rheology in
Reactive Alloying", M. Xanthos, J. Grenci, C. Jacob, S.S. Dagli and H.K.
Kotlar, Proc. SPE RETEC on "Blends, Alloys and Modified Polymers",
Akron, OH October 5-6, 1993. "Engineering Fundamentals of Reactive
Extrusion", D.B. "Structure/Properties Comparison of
Peroxide Modified and Irradiated LDPE/PP Blends", D.W. Yu, M. Xanthos
and C.G. Gogos, American Chemical Society, Division of PMSE, Fall Meeting,
Washington, D.C., 67, p313, 1992. "Reactive Extrusion: Principles and
Practice" M. Xanthos, Ed., , Carl Hanser Verlag, "Peroxide Modified Polyolefin Blends -
Part II - Effects on LDPE/PP Blends with Polymer Components of Dissimilar
Initial Viscosities", D.W. Yu, M. Xanthos and C.G. Gogos, Adv. Polym.
Technol., 11, 4, 295 (1992). "Consider Reactive Extrusion",
D.B. "Reactive Processing in Twin Screw
Extruders", D.B. "Parameters Affecting Process
Efficiency of Peroxide Initiated Controlled Degradation of
Polypropylene" S.H. Ryu, C.G. Gogos and M. Xanthos, Adv. Polym.
Technol., 11, 2, 121 (1991/92) "Compatibilization of Polymer Blends
by Reactive Processing" M. Xanthos and S.S. Dagli, Polym. "Reactive Extrusion in a Single Screw
Extruder - Compatibilization of Nylon 6 and Polypropylene Blends", S.S.
Dagli, J.A. Biesenberger, D.B. "Twin Screw Maleation of EPR", J.
Grenci, M. Xanthos, D.B. "Reactive Extrusion in a Single Screw
Extruder - Maleation of Polyethylene", J. Grenci, J.A. Biesenberger,
D.B. "Rheological Behavior of Polyolefin
Blends Modified Through Reactive Processing", D.W. Yu, 24th MARM ACS
Atlantic Regional Meeting, "Rheokinetics of Step and Chain
Polymerizations", J. Biesenberger and D. Rosendale, ACS Adv. in Chem.
Series, 227, 267 (1990). "Polypropylene/Polyethylene
Terephthalate Blends Compatibilized through Functionalization" M.
Xanthos, M.W. Young, and J.A. Biesenberger, , Polym. "Peroxide Modified Polyolefin Blends -
Part I - Effects on LDPE/PP Blends with Components of Similar Initial
Viscosities" D.W. Yu, M. Xanthos and C.G. Gogos, Adv. Polym. Technol.,
10, 3, 163 (1990). "Interfacial Agents for Multiphase
Polymer Systems: Recent Advances" M. Xanthos, Polym. Eng. Sci., 28, 1392
(1988); ibid., Proc. NRCC/IMRI "Polyblends - 88" Symposium,
Boucherville, Que., Canada, April 5-6, 1988. "Reactive Extrusion of Methyl
Methacrylate", S.K. Dey and J.A. Biesenberger, ANTEC, 1987. "Principles of Polymerization
Engineering", J. Biesenberger and D.H. Sebastian, J. Wiley and Sons
(1983). Xanthos, M., Zhang, Q., Dey, S.K. and Li,
Y., “ Effect of Resin Rheology on the Extrusion Foaming Characteristics of
PET ”, presented at ANTEC’98. Dey, S.K. and Xanthos, M., “ Production of
PET Foam with Viscosity Modifier ”, FoamPlus Conference’98. M. Xanthos, S. K. Dey and Q. Zhang, “ Sheet
Extrusion Of Foamed Polyethylene Terephthalate”, Presented at 1998 polymers,
Laminations and coatings Conference. Xanthos, M., Zhang, Q., Dey, S.K., Li, Y.
and Yilmazer, U. , “ Effect of Resin Rheology on the Extrusion Foaming
Characteristics of PET ”, Jou. Cellu. Plast., Vol 34, No. 6, page 498, 1998. Q. Zhang, M. Xanthos and S.K. Dey, “
In-Line Measurement of Gas Solubility in Polystyrene and Polyethylene
Terephthalate Melts During Foam Extrusion”, accepted for presentation at the
Winter Annual Meeting of ASME ( American Society of Mechanical Engineers), M. Xanthos, S.K. Dey, Q. Zhang and J.
Quintans, ”Parameters Affecting Extrusion Foaming of PET by Gas Injection”,
ANTEC’99, SPE Preprint page 2109. "Production of PET Foams with
Viscosity Modifiers", S.K. Dey, M. Xanthos and Q. Zhang, presented at
FoamPlas Conference '98 (May 1998), "Effect of Resin Rheology on the
Extrusion Foaming Characteristics of PET", M. Xanthos, Q. Zhang, S.K.
Dey and Y. Li, presented at ANTEC '98 (April 1998). "Method of Preparing Thermoplastic
Foams using a Gaseous Blowing Agent", J.A. Biesenberger, S.K. Dey, and
D.B. "On-Line and Off-Line Gas Solubility
Measurements in Foamable Thermoplastics", N. Faridi, S.K. Dey, M. Xanthos
and Q. Zhang, Thirteenth International Polymer Processing Society Meeting,
Meadowlands Hilton Hotel, Secaucus, NJ, USA, June 10-13, 1997. "Measurement of Solubility of Gases in
Semi-crystalline Polymers", N. Faridi, S.K. Dey and A. Chawda, Proc. 55th
SPE ANTEC, page 2,221, 1997. "Measurement of Gas Solubility in
Thermoplastic Melts During Foam Extrusion", S.K. Dey, Q. Zhang, N.
Faridi and M. Xanthos, Proc. 55th SPE ANTEC, page 1,988, 1997. "Use of Inert Gases in Extruded Medium
Density Polypropylene Foams", S.K. Dey, P. Natarajan, M. Xanthos and
M.D. Braathen, J. Vinyl & Additive Tech., Dec. 1996, Vol. 2, No. 4, page
339. "Recent Developments in Inert Gas
Foaming of Extruded Thermoplastics", S.K. Dey and M. Xanthos, Foam
Conference '96, "Use of Inert Gases in Extruded Medium
Density Polypropylene Foams", S.K. Dey, P. Natarajan, M. Xanthos and M.
D.Braathen, Proc. 54th SPE ANTEC, 1955 (1996). "Inert-Gas Extrusion of Rigid PVC
Foam", S.K. Dey, C. Jacob and M. Xanthos, Journal of Vinyl &
Additive Technology, March, 1996. "New Foam Extrusion Technology is
"Environmentally Friendly", M.C.Gabriele, Plastics Technology, 20,
August 1995. "Inert Gases as Physical Blowing
Agents for 'Green' Plastics Foams", M. Xanthos, J. Biesenberger, and
S.K. Dey, PPS 11th Annual Meeting, March 27 - 30, 1995, Seoul, Korea. "Inert-Gas Extrusion of Rigid PVC
Foam", S.K.Dey, C.Jacob and M. Xanthos, Journal of Vinyl & Additive
Technology, 2, 1, 48 (1996); ibid., Proc. 53rd SPE ANTEC, 4138 (1995). "Inert Gases as Alternative Blowing
Agents for Extruded Low Density Polystyrene Foam", C.Jacob and S.K.Dey,
Journal of Cellular Plastics, 31, 1, 38 (1995). "Inert Gas Foaming of Rigid PVC",
S.K. Dey, C. Jacob, M. Xanthos, ANTEC, 1995. "Inert Gas Foam Extrusion
Technology", PPI & NJPEC seminar, "Inert Gases as Alternative Blowing
Agents for Extruded Low density Polystyrene Foam", C.Jacob, S.K.Dey,
Proc. 52nd SPE ANTEC, 1964 (1994). "Effect of Physical Blowing Agents on
Crystallization Temperature of Polymer Melts", S.K. Dey, C.Jacob and
J.A.Biesenberger, Proc. 52nd SPE ANTEC, 2197 (1994). "Low Density Foams From
Environmentally Inert Physical Blowing Agents", S.K.Dey, PPI
Publication, April 1993. "Inert Gases as Alternative Foaming
Agents For Thermoplastics", C.Jacob and S.K.Dey, Polymer Processing
Society Regional Meeting for the Americas, August 8-11, 1993, West Virginia
University, Morgantown, WV. "Measurement of Solubility of Gases in
Polymer Melts", S.K.Dey, Adv. Polym. Technol., 10,4, 317 (1990). "Measurement of Gas Solubility and
Relationship to Extruded Foam Properties: A New Apparatus and some Data on
Nitrogen in Polyolefins", S.S.Dagli, R.F. Staats-Westover and
J.A.Biesenberger, Proc. 47th SPE ANTEC, 889 (1989). "Processing/Structure Relationships of
Mica-Filled Polyethylene Films with Low Oxygen Permeability", M.
Xanthos, N. Faridi and Y. Li, Intern. Polym. Proc.,13, 1, 58, 1998. "Effects of Fillers on Permeability
and Mechanical Properties of HDPE Blown Films", T.S. Gill and M.
Xanthos, J. Vinyl and Addit. Technol., 2, 3, 248, 1996; ibid., Proc. 54th SPE
ANTEC, 42, 1757, 1996. "Effect of the Processing Conditions
and Blending with Linear Low Density Polyethylene on the Properties of Low
Density Polyethylene Films", U. Yilmazer, J. Applied Polymer Science,
2379, (1991). "Development of Thermal Films for
Greenhouse Applications Using Long Infrared Radiation Absorbers", U.
Yilmazer, M. Bakar, A. Kioul, J. Plastic Film and Sheeting, 43, (1991). "Linear Low Density Polyethylene/Low
Density Polyethylene Blends for Greenhouse Applications", U. Yilmazer,
M. Bakar, F. Bellahdeb, SPE ANTEC, 1837, (1988). "Effects of Long Infrared Radiation
Absorbers on the Properties of Polyethylene Based Agricultural Films",
M. Bakar, A. Kioul, U. Yilmazer, P. Hadjiandreou, SPE ANTEC, 1464, (1988). "Mechanical and Optical Properties of
Low Density Polyethylene and Linear Low Density Polyethylene Blends", U.
Yilmazer, M. Bakar, Z. Sahed, SPE ANTEC, 1410, (1987). "Devolatilization of Polymer Melts:
II. More Machine Geometry Effects", J. Biesenberger, J. Grenci, S.K. Dey
and Y. Lu, 49th SPE ANTEC, Motreal, May, 1991. "Devolatilization of Polymer Melts:
Machine Geometry Effects", J. Biesenberger, J. Brizzolara and S.K. Dey,
Poly. "Devolatilization of Polymer
Melts:" Machine Geometry and Scale Factors", J. Biesenberger, J.
Brizzolara and S.K. Dey, ANTEC, 1990. "A Direct Injection GLC Method to
Monitor Polymer Melt Devolatilization: MMA in PMMA", J. Biesenberger,
T.N. Edkins and V.J. Notorgiacomo, Poly. "Visualization and Separation
Experiments on Foam-Enhanced Melt Devolatilization: A New Apparatus and Some
Experimental Results with PMMA/MMA", S.K. Dey and J.A. Biesenberger,
ANTEC, 1989. "Emissions During Thermoplastics
Processing - A Review", S.H. Patel and M. Xanthos, Adv. Poly. Technol.,
14, 1, 67 ,1995. "Advances in the Technology of Fiber
Reinforced Thermoplastics During 1992", Paul G. Kelleher, Adv. Polym.
Technol., 13, 2, 157-177, 1994. "Shear Controlled Molding of Long
Fiber Reinforced Thermoplastics", S. Parekh, S. Desai and J.P.
Brizzolara, Proc. 51st SPE ANTEC Ann. Conf., 39, 530, New Orleans, LA, May,
1993. "Advances in Injection Molding of
Fiber-Reinforced Thermoplastics During 1992 - Part II: Processing, Design and
Manufacture", P.G. Kelleher, Adv. Polym. Technol., 12, 3, 297-311, 1993.
"Advances in Injection Molding of
Fiber-Reinforced Thermoplastics During 1991 - Part I: Materials and
Processing", P.G. Kelleher, Adv. Polym. Technol., 11, 4, 305-313, 1992. "Advances in Injection Molding of
Fiber -Reinforced Thermoplastics During 1991 - Part II: Processing, Design
and Manufacture", P.G. Kelleher, Adv. Polym. Technol., 12, 3, 305-313,
1992. "Report on the State of the Art:
Injection Molding of Fiber Reinforced Thermoplastics. Part 1 - Materials and
Process", P.G. Kelleher, Adv. Polym. Technol., 10, 3, 219-230, 1990. "Report on the State of the Art:
Injection Molding of Fiber Reinforced Thermoplastics. Part II - Materials and
Process", P.G. Kelleher, Adv. Polym. Technol., 10, 4, 277-284, 1990. |